The equipment is used as a termination point for the feeder cable to connect with drop cable in FTTx communication network system. The fiber splicing, splitting, and distribution can be done in this box, and meanwhile it provides solid protection and management for the FTTx network building.
1. Environmental requirement
Working temperature: -40℃～+85℃
Relative humidity: ≤85% (+30℃)
Atmospheric pressure: 70KPa~106Kpa
2. Main technical datasheet
Insertion loss: ≤0.15dB
UPC return loss: ≥50dB
APC return loss: ≥60dB
3. Thunder-proof technical datasheet
The insulation resistance between the grounding device and the metal parts of the box is no less than 2 MΩ/500V (DC); IR≥2 MΩ/500V.
The voltage resistance between the grounding device, and the box and its metal parts is no less than 3000V (DC)/min, no puncture, no flashover; U≥3000V
Fast installation, fastening, and sealing of straight-through optical cable with the Fast Plug.
1. Wall-mounted installation
Drill 3 holes into the wall based on the size in table 1, place the expansion bolt Φ7.5*40, place the box to match up the holes and use bolt to fasten
2. Pole-mounted installation
Fix 1 set of the pole ring to the telecom pole.
3. The overhead structure
Tie the two installed on the chassis of the overhead hung on the wire, and then bolted, prevent the case fall off.
Rotate the arrow part of fiber connector counterclockwise and take out the dust cap.
The arrow part of fiber connector is above, insert fiber connector into the socket and then rotate the arrow part clockwise.
1. Users’ Manual*1
2. Accessories Bag*1
3. Pole Ring*2 (Option)